IQOS 2.4 - FAQs

You can easily check the charge level by following these simple steps:
1. Press for 1 second the ON/OFF button
2. The LEDs will turn on and indicate the level of charge:
- 1 LED = low charge level
- 4 LEDs = device is fully charged

It takes approximately 90 minutes to fully charge the IQOS 2.4 Pocket Charger from an electrical outlet. Only charge IQOS 2.4 device using the supplied AC Power Adaptor and USB cable.

The IQOS device does not require a full charge to work. If the IQOS 2.4 Pocket Charger is fully charged you may use the holder for up to 20 times.

You can easily do a reset of your IQOS 2.4 device by simultaneously pressing for 3 seconds for Holder Heater Blade Cleaning and Power buttons until all lights briefly blink.

The red light, blinking or steady, on your Holder may indicate that:
- Holder is not charged
- Device is outside its optimal operating temperature (10°C - 40°C)
- You pressed on the Holder button during usage
- Holder malfunction

To resolve the issue, you may try the following:
a. Check that the IQOS 2.4 Pocket Charger is switched ON and has enough power
b. Place the Holder in the IQOS 2.4 Pocket Charger and wait until it is fully charged (up to 5 minutes).
c. Ensure your Holder’s electric contact is clean
d. If none of the above works, perform a reset of your device

Still no luck? Please contact Customer Support:
• by phone: +370 800 200 90 (I-V 9:00-21:00)
• by email: info@iqos.lt
• on Facebook: IQOS Lietuva
• ask for assistance at the nearest IQOS store.

Any red light, blinking or steady, indicates that there is a device error or device is outside its operating temperature (10°C- 40°C). Please, perform a reset of the IQOS device.

Still no luck? Please contact Customer Support:
• by phone: +370 800 200 90 (I-V 9:00-21:00)
• by email: info@iqos.lt
• on Facebook: IQOS Lietuva
• ask for assistance at the nearest IQOS store.

IQOS 2.4 is designed to work in a wide range of temperatures, but the optimal use is between 10℃ and 40℃.