IQOS 3 MULTI - FAQs

You can easily check the charge level by following these simple steps:
1. Press IQOS 3 Multi Button for 1 second
2. The Battery Status lights will turn on and indicate the level of charge:
- 4 LEDs = more than 75% charged;
- 1 LED = low charge. Need to charge.

It takes approximately 75 minutes to fully charge the IQOS 3 Multi from an electrical outlet. Only charge IQOS 3 Multi device using supplied AC Power Adaptor and USB cable.

The IQOS 3 Multi device does not require a full charge to work. If the device is fully charged you may use it up to 10 back-to-back sessions without recharging.

You can easily reset your IQOS 3 Multi device by pressing and holding the Button for 10 seconds and then releasing. The lights will fade in and out to confirm a reset.

IQOS 3 Multi vibrations are activated in the following situations:
- At the start of the heating (once you press the Button to start) - one vibration
- When the device is ready to be used - two vibrations
- When the experience is nearly complete (30 seconds prior the end of the tobacco session) - two vibrations

Any white light indicates that the device performs various operations, like charging, re-initialization, ready to use, fully charged etc.

Any red light indicates that there is a device error or device operates outside its operating temperature (0 - 50°C). Please, perform a reset of your device and try again.

Still no luck? Please contact Customer Care:
• by phone: +370 800 200 90 (I-V 9:00-21:00)
• by email: info@iqos.lt
• on Facebook: IQOS Lietuva
• ask for assistance at the nearest IQOS store.

IQOS 3 Multi is designed to work in a wide range of temperatures, but the optimal use is between 0℃ and 50℃.