FORGOT PASSWORD?


Continue with login
OR

FAQ

IQOS 3

How can I check the charge level of the battery?

You can easily check the charge level by following these simple steps:
1. Press Pocket Charger Button for 1 second (short press)
2. The Battery Status lights will turn on and indicate the level of charge

How long does it take to fully charge the device?

It takes approximately 120 minutes to fully charge the IQOS 3 Pocket Charger from an electrical outlet. Only charge IQOS 3 device using supplied AC Power Adapter and USB cable.

Should I always fully charge my Pocket Charger battery?

The IQOS 3 device does not require a full charge to work. If the IQOS 3 Pocket Charger is fully charged you may use the Holder up to 20 times.

Can I charge 2.4 / 2.4P Holder with the IQOS 3 Pocket Charger and vice versa?

No, the new IQOS 3 Pocket Charger is not compatible with the previous versions. If you insert the 2.4/2.4 Plus Holder into the IQOS 3 Pocket Charger, the Holder will not charge because of the different size. The IQOS 3 Holder cannot be inserted into 2.4 /2.4 Plus Pocket Charger because of the different size.

Can I use the AC power adaptor & USB cable from the previous device version to charge the IQOS 3 device?

You can use the IQOS AC Power Adaptor from the previous device versions. However, IQOS 3 USB cable hosts a USB-C port, which is different from the previous versions.

How can I reset my IQOS device?

You can easily reset your IQOS 3 device by pressing and holding the Pocket Charger Button for 10 seconds and then releasing. Battery Status light will fade in, blink twice, and then progressively fade in to confirm a reset.

What do device vibrations mean?

Holder vibrations are activated in the following situations:
- At the start of the heating (once you press the IQOS 3™ Holder Button to start heating) - one vibration
- When the device is ready to be used – two vibrations
- When the experience is nearly complete (30 seconds prior the end of the tobacco session) - two vibrations

What do the lights on my Holder mean?

Any white light indicates that the IQOS 3™ device performs various operations, like charging, resetting, OR is ready to use, fully charged etc. Any red light (steady or blinking) indicates that there is a device error. Please, perform a reset of your device and try using it again.
Still no luck? Please contact Customer Care:
• By writing a personal message on Facebook IQOS Lietuva page,
• By calling 8 800 200 90,
• Via info@IQOS.lt

What do the lights on my Pocket Charger mean?

Any white light indicates that the device performs various operations, like charging, re-initialization, ready to use, fully charged etc. A red blinking light can occur on:
• Only Bottom Charger Light indicator: the device is outside operating temperature (0 - 50°C). -> Wait until device is within temperature limits.
• Holder status light: Holder malfunction -> Please, perform a reset of the device.
Still no luck? Please contact Customer Care:
• By writing a personal message on Facebook IQOS Lietuva page,
• By calling 8 800 200 90,
• Via info@IQOS.lt

What is the optimal IQOS device functioning temperature?

IQOS 3 is designed to work in a wide range of temperatures, but the optimal use is between 10℃ and 50℃.

What is a New ProtectPlus™ System?

ProtectPlus™ System hosts a number of technological improvements:
- robust outer shell improves shock resistance of the device
- new side door opening tested to guarantee reliable performance
- new technology provides longer battery life
- heating chamber of your Holder has been redesigned for improved reliability

This site contains information on a product containing tobacco and is reserved for smokers over 18 years old residing in Lithuania.
Are you a smoker over 18 years old?

This site contains information on a product, which is for adults only. The website is reserved for smokers over 18 years old.

For more information about Philip Morris International or its products, visit pmi.com