1. Turn ON the device – press and hold Pocket Charger Button for 4 seconds, then release; Pocket Charger Status Lights and Holder Status Lights will turn ON slowly.
2. Insert Holder into Pocket Charger, and close Wrap to charge. Holder Status Light will show Holder battery level.
3. Insert the SMARTCORE STICK™ heating unit to the line on the filter until Holder vibrates.
4. Preheating starts automatically (AutoStart), or by swiping up on Touch Screen. Touch Screen will show preheating status (app. 20 sec).
5. 2nd vibration – you can start using.
6. Countdown Light on the Touch Screen will indicate the remaining time of the heating cycle.
7. Nearly Complete – to signal last 30 seconds or last 2 puffs, Holder will vibrate.
8. Remove used SMARTCORE STICK™ heating unit and dispose as per Safety Warnings and Instructions.
9. Insert Holder into Pocket Charger to recharge.
IQOS ILUMA and IQOS ILUMA i devices are designed to be used with heating units TEREA, DELIA and LEVIA. The device does not work with heating units HEETS or Fiit. Do not ingest or disassemble the heating units – it contains a sharp metal part which can cause serious injury if swallowed. Keep out of reach of children and pets. For more details, see Important information at iqos.com.
2. Insert Holder into Pocket Charger, and close Wrap to charge. Holder Status Light will show Holder battery level.
3. Insert the SMARTCORE STICK™ heating unit to the line on the filter until Holder vibrates.
4. Preheating starts automatically (AutoStart), or by swiping up on Touch Screen. Touch Screen will show preheating status (app. 20 sec).
5. 2nd vibration – you can start using.
6. Countdown Light on the Touch Screen will indicate the remaining time of the heating cycle.
7. Nearly Complete – to signal last 30 seconds or last 2 puffs, Holder will vibrate.
8. Remove used SMARTCORE STICK™ heating unit and dispose as per Safety Warnings and Instructions.
9. Insert Holder into Pocket Charger to recharge.
IQOS ILUMA and IQOS ILUMA i devices are designed to be used with heating units TEREA, DELIA and LEVIA. The device does not work with heating units HEETS or Fiit. Do not ingest or disassemble the heating units – it contains a sharp metal part which can cause serious injury if swallowed. Keep out of reach of children and pets. For more details, see Important information at iqos.com.
Before the first use, fully charge the Pocket Charger with a compatible AC Power Adaptor (5V, 2A, Type C output) and C-type charging cable from an electrical outlet.
A full charge takes approx. 135 min (2h 15 min).
You can charge the IQOS ILUMA i PRIME Pocket Charger with or without the Holder inserted.
It can take up to 10 minutes to fully charge the Holder for the first time (after opening the packaging) or after a long period of inactivity. This is normal.
IQOS ILUMA i PRIME Pocket Charger does not require a full charge to work, however we recommend to fully charge it before the first use.
To charge your Holder, insert the Holder into Pocket Charger, and close Wrap to charge. Holder Status Light will show Holder battery level.
A full charge takes approx. 135 min (2h 15 min).
You can charge the IQOS ILUMA i PRIME Pocket Charger with or without the Holder inserted.
It can take up to 10 minutes to fully charge the Holder for the first time (after opening the packaging) or after a long period of inactivity. This is normal.
IQOS ILUMA i PRIME Pocket Charger does not require a full charge to work, however we recommend to fully charge it before the first use.
To charge your Holder, insert the Holder into Pocket Charger, and close Wrap to charge. Holder Status Light will show Holder battery level.
To check the charge level of the Pocket Charger, short press the Pocket Charger Button. Status Lights will turn ON to indicate battery level:
4 LEDs = more than 75% charged
1 LED = less than 25%
1 LED orange triple blink = battery depleted. Need to charge.
To check the Holder Status – tilt Holder towards you or short press the Touch Screen. Holder Status Lights will show Holder battery level.
If the battery is depleted, the Touch Screen will show the sign as below (zero inside the light ring and no lights on the light ring).
To check the Holder Status – tilt Holder towards you or short press the Touch Screen. Holder Status Lights will show Holder battery level.
If the battery is depleted, the Touch Screen will show the sign as below (zero inside the light ring and no lights on the light ring).
To reset your IQOS ILUMA i PRIME, place the Holder in the Pocket Charger and press the Pocket Charger Button for 10 seconds. All Status Lights will turn OFF, blink twice, and turn ON to confirm a RESET.